Automotive Thermal Systems Labs

This calorimeter is designed to determine not only the capacity of the complete automotive A/C system, but also the capacity of compressor, condenser, evaporator, expansion valve, fan, heater, radiator, charge air cooler, oil cooler and etc.. It can determine the control performance of the HVAC system, and the capacity of A/C system with real vehicle pipes as well. It plays an important role in product R&D and quality control. All the related parameters of air side and medium side can be controlled and measured precisely.

This calorimeter is designed to determine not only the capacity of electric Vehicle A/C system, but also the capacity of compressor, condenser, evaporator, expansion valve, fan, battery heat exchanger, coaxial heat exchanger, economizer, etc.

This calorimeter is designed to determine the capacity of the front-end modules including radiators, charge air coolers, oil coolers, condensers and fans.

This calorimeter is designed to determine the capacity of single or combined components of automotive thermal systems, including the condensers, evaporators, expansion valves, heaters, radiators, charge air coolers, oil coolers, EGR coolers and coaxial heat exchangers. It’s applied to determine the capacity and fluid resistance of the components, playing an important role in product R&D and quality control.

This calorimeter is designed to determine the performance of roof-top bus air conditioner through air enthalpy method, including cooling capacity, air-flow rate, compressor power consumption and heat-exchanger air resistance curve, assisting in the performance test and R&D of bus air conditioner.

This calorimeter consists of a test chamber and an air supply system, the temperature, humidity, flow rate or pressure of supplied air can be controlled. It is designed to determine the performance of the HVAC systems, evaporator units, heater units and fans.

This test device is designed to research the performance of temperature control and the air distribution from each air outlet of automotive HVAC system.

This test bench is designed to determine the performance of the fans of automotive A/C systems, conforming to ISO 5801 and GB/T 1236.